Description
see
Project
Deadline: Day 20/04/2025 @ 23:59
[Total Mark is 14]
Student Details:
CRN:
Name:
Name:
Name:
ID:
ID:
ID:
Instructions:
• You must submit two separate copies (one Word file and one PDF file) using the Assignment Template on
Blackboard via the allocated folder. These files must not be in compressed format.
• It is your responsibility to check and make sure that you have uploaded both the correct files.
• Zero mark will be given if you try to bypass the SafeAssign (e.g., misspell words, remove spaces between
words, hide characters, use different character sets, convert text into image or languages other than English
or any kind of manipulation).
• Email submission will not be accepted.
• You are advised to make your work clear and well-presented. This includes filling your information on the cover
page.
• You must use this template, failing which will result in zero mark.
• You MUST show all your work, and text must not be converted into an image, unless specified otherwise by
the question.
• Late submission will result in ZERO mark.
• The work should be your own, copying from students or other resources will result in ZERO mark.
• Use Times New Roman font for all your answers.
Restricted – مقيد
Project Instruction
Pg. 01
Project Instruction
Project Objective:
Design, configure, and test a network setup in Packet Tracer to successfully transmit data
packets between devices in different LANs across two separate WANs (WAN 1 and WAN 2).
Group Details
•
Group Size = 2-3 Members.
•
One group member (group leader/coordinator) must submit the project report on
blackboard. Marks will be given based on your submission and quality of the contents.
Project Report
•
Each Report will be evaluated according to the marking criteria
Project Description
Pg. 02
Learning
Outcome(s):
Demonstrate
Project Description
14 Marks
network-
Your task is to configure a network setup to successfully transmit data packets from a
device in any LAN of WAN 1 to a device in any LAN of WAN 2. Each WAN
contains 2 LANs, and each LAN has 3 devices. Follow the instructions below to
complete the task:
addressing
Network Design Requirements:
protocol
configuration,
schemes and
analyze packet
transmission for
the Local and
Wide Area
Networks.
1. WAN 1:
o Contains LAN 1 and LAN 2.
o Each LAN has 3 devices (PCs or laptops).
o Assign private IP addresses to the devices in each LAN (e.g.,
use 192.168.1.0/24 for LAN 1 and 192.168.2.0/24 for LAN 2).
o Connect each LAN to a router (Router 1).
2. WAN 2:
o Contains LAN 3 and LAN 4.
o Each LAN has 3 devices (PCs or laptops).
o Assign private IP addresses to the devices in each LAN (e.g.,
use 192.168.3.0/24 for LAN 3 and 192.168.4.0/24 for LAN 4).
o Connect each LAN to a router (Router 2).
3. WAN Connection:
o Connect Router 1 and Router 2 using a serial link to simulate a WAN
connection.
o Assign IP addresses to the serial interfaces (e.g., 10.0.0.1/30 for Router
1 and 10.0.0.2/30 for Router 2).
Configuration Details:
1. Assign IP Addresses:
o Configure IP addresses, subnet masks, and default gateways for all
devices in each LAN.
o Example:
▪ LAN 1: 192.168.1.0/24, Default Gateway: 192.168.1.1 (Router
1’s interface).
▪ LAN 2: 192.168.2.0/24, Default Gateway: 192.168.2.1 (Router
1’s interface).
▪ LAN 3: 192.168.3.0/24, Default Gateway: 192.168.3.1 (Router
2’s interface).
Project Description
Pg. 03
▪
LAN 4: 192.168.4.0/24, Default Gateway: 192.168.4.1 (Router
2’s interface).
2. Router Configuration:
o Configure IP addresses on the LAN and WAN interfaces of both
routers.
o Example:
▪ Router 1:
▪ LAN 1 Interface: 192.168.1.1/24
▪ LAN 2 Interface: 192.168.2.1/24
▪ WAN Interface (Serial): 10.0.0.1/30
▪ Router 2:
▪ LAN 3 Interface: 192.168.3.1/24
▪ LAN 4 Interface: 192.168.4.1/24
▪ WAN Interface (Serial): 10.0.0.2/30
3. Enable Routing:
o Configure static routes or a dynamic routing protocol (e.g., RIP) on both
routers to ensure communication between WAN 1 and WAN 2.
Testing and Verification:
1. Use the ping command to test connectivity between a device in any LAN of
WAN 1 and a device in any LAN of WAN 2.
2. Verify that data packets are successfully transmitted.
Questions to Answer:
1. What IP addressing scheme did you use for each LAN? (3 marks)
2. What routing method (static or dynamic) did you configure on the routers, and
why? (3 marks)
3. What challenges did you face during the configuration, and how did you
resolve them? (3 marks)
4. Provide screenshots of the successful ping tests between devices in WAN 1 and
WAN 2. (5 marks)
Purchase answer to see full
attachment
